Coke-oven gas exhausters are used for suction of gas from coke ovens and for its conveying through pipelines to chemical products trapping equipment.
Application branches:
- Metallurgy
Specification
|
Type |
Capacity m3/min
|
Pressure mm. wat. st. |
Power consumption kW
|
Rotor speed 1/min
|
Mass t
|
Engine power kW
|
Voltage V |
Mass engine t
|
Coolant flow m3/h |
|---|---|---|---|---|---|---|---|---|---|
|
750-23-8 |
450-750-900 |
3310-3000-2410 |
270-450-490 |
4760 |
13,4 |
800 |
6000 |
3,0 |
44,7 |
|
1200-27-2 |
750-1270-1380 |
3760-3500-3380 |
600-900-950 |
3906 |
17,0 |
1250 |
6000 |
6,2 |
30,0 |
Competitive advantages and design features:
- Coke oven gas exhausters are single-cylinder, two-stage, with one-side suction units.
- Case is made of cast iron, with horizontal and vertical splits.
- Suction and delivery nozzles are turned down. Two impellers fixed on a shaft, diffusers and guiding vanes form gas flow path. Labyrinth seals separate compression stages. Asynchronous motors are as a drive.
- Coke-oven gas exhausters are provided by shaft-turning gear
- For rotation the rotor during oiling,
- When exhausters are in standby mode,
- During their steaming before start up and after shutt-down. Steaming process is carried out
- For cleaning gas flow path from tarry substances.
*Specify the price and receive additional information in Sales Department:
tel.: +7 (4212) 381-561, 381-894
e-mail: os@dalenergomash.ru [1]